The front chamber of the sealed box-type furnace is not only the transition area for the incoming material, but also the output area after the workpiece is heated for quenching and slow cooling.SWD700 PLC CONTROL 3D BEAMS DRILLING MACHINE To be able to quench, there should be an oil tank under the front chamber; to be able to cool slowly, the top or side of the front chamber should be connected to a slow cooling chamber. During feeding, discharging, quenching and slow cooling, the tray and the workpiece must move back and forth and up and down. The forward and backward movement is completed by a push-pull feeder, and the up and down movement is completed by a lifting mechanism.HDZL SERIES SINGLE SPINDLE HIGH SPEED CNC BEAMS DRILLING MACHINE The front room can be divided into a slow cooling room and a slow cooling room. The front chamber shell is a welded square sealed chamber, which can be integrated with the furnace shell or quenching oil tank, or connected with bolts. Influence of Reaction Sintering Process on Properties of Silicon Carbide Ceramics The front door is located in front of the front room, and is opened and closed by the motor reducer driving the chain. The asbestos rope is used between the door and the frame to be pressed by the weight of the door or the pressing mechanism. There is a fire curtain device under the door.Analysis of carbon content on the surface of carburized parts
top of page
bottom of page
ty